[Assessment of the structural features of the hard palate in endonasal surgery]. / Otsenka anatomii tverdogo neba v khirurgii peregorodki nosa.

Data on the features of the anatomical structure of the hard palate are little described in the scientific literature, and therefore are not taken into account when planning surgical treatment. One of the intraoperative complications during intervention on the lower part of the nasal septum is perforation of the bottom of the nasal cavity, which can develop during a christotomy. This complication mainly depends on the features of the anatomical structure of the hard palate. OBJECTIVE: To study the anatomical structure of the hard palate from the point of view of rhinosurgery, using vector analysis of multispiral computed tomography (MSCT), and to establish anatomical features that should be taken into account when performing surgical interventions on the nasal septum. MATERIAL AND METHODS: 107 patients (30 men, 77 women) were examined without congenital cleft palate and surgical interventions on the structures of the nasal cavity and hard palate. All patients underwent MSCT of the nose and paranasal sinuses (PNS) followed by multiplanar image reconstruction. The key point relative to which the measurements were carried out was the posterior wall of the incisor canal from the side of the nasal cavity. The line corresponding to the bottom of the nasal cavity was chosen as the main vector. In the work, measurements of the thickness of the hard palate (THP) at the level of the palatal suture and the width of the palatal suture (WPS) were carried out. RESULTS: Statistical analysis of the obtained results showed that the THP is 1.74 mm [min 0.28; max 6.46], the WPS is 0.9 mm [min 0.2; max 2.51] (conditional norm). In 19 patients (17.8%), the THP was 0.82 mm, in 2 patients (1.9%) - 0.2 mm. In 3 patients (2.8%), the WPS was equal to 2.5 mm. CONCLUSION: Thus, the data obtained by us indicate that the surgical anatomy of the hard palate is characterized by significant variability, while in some patients the THP can be reduced by 8.8 times, and the WPS increased by 2.7 times compared to normal values. Such anatomical features of the structure of the hard palate should be taken into account when planning septoplasty, since this contingent of patients has an increased risk of developing iatrogenic perforation of the nasal floor during surgical intervention on the lower floor of the nasal septum.

Bilateral collagenous fibroma of the hard palate: a case report and review of the literature.

BACKGROUND: Collagenous fibroma or desmoplastic fibroblastoma is a rare benign fibrous tissue tumor. It usually presents as a painless, slowly growing mass. Collagenous fibroma arises ordinarily inside the subcutaneous tissues or skeletal muscles. Histopathologically, the tumor consists of scattered stellate and spindle cells in a hypovascular collagenous stroma without atypia or infiltration. The oral cavity is a very uncommon site for desmoplastic fibroblastoma. Only 15 published articles in the literature reported the intraoral location. We present a case of collagenous fibroma with a bilateral distribution on the hard palate. This is the second case of bilateral collagenous fibroma after a previously reported one in literature; however, our case was larger, occupying almost the whole palate. We discuss the management of this rare tumor and how we can reach definite diagnosis. CASE PRESENTATION: A 37-year-old Caucasian female patient had a huge bilateral firm palatal mass that caused breathing problems. There was no history of trauma and the patient had no relevant medical history Total surgical excision under general anesthesia was carried out and histopathological examination suggested a benign mesenchymal tumor. Immunohistochemistry was necessary to confirm the tumor origin and to exclude aggressive fibromatosis. A diagnosis of bilateral collagenous fibroma was reached. Six months after surgery, there was no recurring lesion and the patient's health was good. CONCLUSIONS: Collagenous fibroma is a benign fibrous tissue tumor of unknown cause that is treated with simple excision. The prognosis is good with no recurrence. Reaching an accurate diagnosis is mandatory to avoid aggressive treatment since collagenous fibroma may be misdiagnosed as aggressive fibromatosis in case of massive size. Clinicians and pathologists should be aware of this unusual tumor for conservative management without side effects.

Comparison of skeletal and dental effects of two different tooth-tissue-borne types of rapid maxillary expansion appliances: A CBCT retrospective study.

OBJECTIVES: To compare the skeletal and dental effects of different types of rapid maxillary expansion (RME) appliances using cone-beam computed tomography (CBCT). MATERIALS/METHODS: This multi-centre study was conducted with a total of 56 patients. The sample consisted of two groups including the McNamara-Type RME (MNR) group with 30 patients (16 females, 14 males, mean age: 13.38 ± 1.16 years) and Full-Coverage RME (FCR) group with 26 patients (10 females, 16 males, mean age:13.78 ± 1.06 years). Twenty-one parameters were measured on CBCT images including 4 maxillary skeletal, 12 maxillary alveolar, and 5 maxillary dental measurements, and the data were analysed using the SPSS 20.0 software. RESULTS: The rates of increase in the palatal maxillary width (PMW) (3), PMW(4), and PMW(6) were significantly higher in the MNR group (P < .05). While the rates of increase in the buccal maxillary width (BMW) (3) and BMW(4) were statistically higher in the MNR group, the rate of increase in BMW (6) was higher in the FCR group (P < .05). The increases in HPW (4), HPW (6), PAA4(°), and PAA6(°), which are parameters about hard palate width (HPW) and palatal alveolar angle (PAA), were also significantly higher in the MNR group (P < .05). The increases in PAW (4) and PAW (6), referring to the widths between the palatal root apices were significantly higher in the MNR group (P < .05).The increase in Slope-6(°) was also higher in the MNR group (P < .05). CONCLUSION: Expansion in the palatal region on the alveolar level was higher in MNR than in FCR, while expansion in FCR was the highest in the posterior. In both appliances, there was tipping in the buccal direction in both alveolar bone and teeth, and the rate of this tipping was higher in MNR.

Influence of the palatal plane cant and skeletal patterns in the hard palate thickness?

INTRODUCTION: The aim of the present study was to evaluate the thickness of the hard palate at the different angles formed by the palatal plane and the Frankfort horizontal line using computed tomography in patients with different facial patterns for planning the installation of MARPE. MATERIALS AND METHODS: The measurements were analysed in the hard palate of 106 patients. Four regions were selected passing through the mesial face, tangent at the level of the cemento-enamel junction of the premolars and molars. The bone thickness was measured from the floor of the nasal cavity to the cortical bone of the hard palate, 02 measurements with a distance of 05 mm between them (2.5 mm on each side starting from the midsagittal line) and 2 more with a distance of 7 mm between measurements (3.5 mm on each side starting from the midsagittal line). The palatal plane cant was determined based on the palatal plane and the Frankfort horizontal plane. The sagittal skeletal pattern was determined based on the ANB angle and the vertical skeletal pattern based on the SN.Go.Gn angle. RESULTS: Palatal bone thickness was greater in males than in females. Regarding the sagittal skeletal pattern, patients with Class II were found to have a thinner hard palate than Class I and Class III patients. No difference in the vertical skeletal pattern was observed between groups. Regarding the palatal plane cant, bone thickness was greater in patients with clockwise rotation. CONCLUSIONS: Careful planning should be considered in the case of female patients; patients with greater angles of the palatal plane cant and Class II patients have a smaller bone thickness.

Update of the classification of midpalatal suture behaviour after surgically assisted rapid maxillary expansion using computed tomography.

The aim of this study was to update the midpalatal suture classification after surgically assisted rapid maxillary expansion (SARME) using computed tomography (CT). Thirty-five patients with a transverse maxillary deficiency and unilateral or bilateral posterior crossbite underwent SARME with osteotomy of the pterygoid apophysis of the sphenoid. CT was performed before installation of the Hyrax expander appliance and after the final activation. Opening of the midpalatal suture was classified into three types: type I, total midpalatal suture opening from anterior nasal spine (ANS) to posterior nasal spine (PNS); type II, partial midpalatal suture opening from ANS to the transverse palatine suture, with partial or non-existent opening of the midpalatal suture posterior to the transverse palatine suture; type III, complete maxillary opening from ANS, but not of PNS, because a paramedian fracture completed the opening of the hard palate. Type I was observed in 42.8% of the patients, type II in 40%, and type III in 17.2%. Opening of the transverse palatine suture was found in all midpalatal suture opening patterns and was more frequent in type III, followed by type II and type I. CT was used to update the classification of midpalatal suture patterns, with the inclusion of type III: total opening of the hard palate due partly to opening of the midpalatal suture and partly to a paramedian fracture.

Process of Hard Palate Osteonecrosis Demonstrated on Serial 18F-FDG PET/CT Scans.

ABSTRACT: Osteonecrosis of the hard palate is rare. Here, we demonstrated the dynamic metabolic and structural changes during the process of osteonecrosis of the hard palate by serial 18F-FDG PET/CT scans in a patient with nasal NK/T-cell lymphoma. On the baseline scan, increased FDG uptake in the periphery of the hard palate could be observed. On the following scans after treatment, a focal metabolic defect on the hard palate with no structural changes and with bone sequestration and perforation have been observed successively. Our case indicates that the metabolic defect on 18F-FDG PET/CT may be an early sign of osteonecrosis.

Evaluation of palatal dimensions in different facial patterns by using digital dental casts.

OBJECTIVE: To analyze the variations of hard palate volume in adults with normal occlusion and different facial types and patterns, by using a three-dimensional analysis on digital casts. METHODS: The dental casts of 70 Caucasian adults (28 men, 42 women), mean age of 16.4 years (SD 1.3 years), were scanned by using a tridimensional scanner (Delcam PowerSHAPE™, 2010, Birmingham, UK). Close points were selected in the gingival and cervical regions on the lingual surface of the maxillary teeth, to analyze palatal morphology. The facial patterns and types, and the measurements (width, length, height, volume) of the space on the hard palate were compared using analysis of covariance (ANCOVA), with age as the covariate, and sex as the independent variable. The significance level of 5% (p < 0.05) was adopted. RESULTS: This study showed that the measurements of the width and length were similar among the mesofacial, dolichofacial and brachyfacial facial types, although the height and volume of the space on the hard palate were slightly smaller in dolichofacial individuals, and both Pattern I and Pattern II individuals showed no significant changes for the four measurements. The mean values among facial patterns were: Pattern I - width 38.31±2.59 mm; length 37.44±2.42 mm; height 17.03±2.42 mm and volume 10.52±1.72 mm3; Pattern II - width 37.48±2.44 mm; length 37.48±2.44 mm; height 16.79±2.42 mm and volume 10.41±1.65 mm3 (p>0.05 for all variables). CONCLUSION: There were no significant differences for the facial patterns and facial types of the individuals compared in the analyzed sample.

Midpalatal suture bone repair after miniscrew-assisted rapid palatal expansion in adults.

BACKGROUND: Midpalatal suture (MPS) repair in growing patients after RPE has been previously reported. However, differences between young and adult patients for timing and pattern of MPS repair after rapid maxillary expansion are expected. The aim of this study was to evaluate the midpalatal suture repair pattern after miniscrew-assisted rapid palatal expansion (MARPE) in adult patients. MATERIALS AND METHODS: The study included 21 patients (six males, 15 females) successfully treated with MARPE with a mean initial age of 29.1 years of age (SD = 8.0; range = 20.1-45.1). MPS repair was evaluated using maxillary axial and coronal sections derived from CBCT exams taken 16 months after the expansion (SD = 5.9). Objective and subjective assessments of MPS repair were performed. Objective assessments were performed measuring MPS bone density at anterior, median and posterior region of hard palate. Pre-expansion and post-retention bone density changes were evaluated using paired t tests (p < 0.05). Midpalatal suture bone repair was scored 0 to 3 considering, respectively, the complete absence of bone repair in the MPS, the repair of less than 50% of the MPS, the repair of more than 50% of the MPS and the complete repair of the MPS. Intra- and interexaminer reliability evaluation were assessed using Kappa coefficient. RESULTS: The objective evaluation showed a significant higher bone density at the pre-expansion stage in all palatal regions. The reliability of the subjective method was adequate with intra- and interexaminer agreements varying from 0.807 to 0.904. Scores 1, 2 and 3 were found in 19.05%, 38.09% and 42.86% of the sample, respectively. The most common region demonstrating absence of bone repair was the middle third. The anterior third of the midpalatal suture was repaired in all patients. CONCLUSIONS: A decreased bone density was observed after the retention period when compared to pre-expansion stage. Most adult patients demonstrated incomplete repair of the midpalatal suture 16 months after MARPE. However, adequate bone repair covering more than half of the hard palate extension was observed in 80.95% of the patients.

A new perspective on the relationship between anchorage and palatal morphology: Three-dimensional digital model analysis.

Background: The tooth movements were generally analyzed in two dimensions on cephalometric radiographs. Nowaday, 3D digital model analysis, which does not have any harmful effects on patients, can be used to evaluate the palatal morphology and coronal tooth movements in a very comfortable and easy way. Aims: To investigate the effect of palatal morphology on anchorage reinforcement during intraoral molar distalization with pendulum appliance using 3D model analysis. Materials and Methods: The material consisted of before (T0) and after (T1) dental plaster models of Class II malocclusion patients (17 females, 3 males) treated with pendulum appliance for molar distalization and Nance appliance for anchorage. T0 and T1 digital models were superimposed using the palatal area as a reference via three points and surface-matching software, and the changes in teeth movement were calculated for left and right central incisors, first premolars, and first and second molars. Palatal morphology was evaluated at T0 on digital models as palatal inclination, palatal depth angles, and anterior hard palate area. Wilcoxon test was used to evaluate the treatment results and Spearman's correlation analysis was performed to evaluate the relationship between palatal morphology and dental movement. The upper limit for the level of significance was taken as 0.05. Results: Mesial movement of first premolars and distal movement of first and second molars were found to be statistically significant (P < 0.001). A weak negative correlation was found between the palatal inclination and the movement of first premolars (P < 0.045 and P < 0.003). Palatal depth angles and anterior hard palate area had no correlation with dental movements. Conclusion: Presented results supported that the mesial movement of premolar teeth decreased as the inclination of the palate increased.

Relationships between contrast-enhanced computed tomography features of hard palate cancer and pathological depth of invasion.

OBJECTIVE: The study aimed to determine the relationships between contrast-enhanced computed tomography (CECT) features of hard palate cancer (radiological depth of invasion [r-DOI], detectability of the lesion, and tumor invasion into the palatal bone) and the pathological DOI (p-DOI) of the tumors. STUDY DESIGN: In total, 36 lesions were retrospectively evaluated by 2 board-certified radiologists, who examined CECT scans for the radiological features, and 2 board-certified pathologists, who measured the p-DOI on histopathologic sections. Correlation between r-DOI and p-DOI was calculated. The Youden index was used to calculate the optimal p-DOI cutoff values to distinguish between detectable and undetectable lesions and between tumors with and without bony structure invasion. RESULTS: There was excellent agreement between r-DOI and p-DOI (intraclass correlation coefficient = 0.80). The p-DOI of CECT-detectable lesions was significantly greater than that of CECT-undetectable lesions (P < .001), with a p-DOI cutoff value of 4 mm. The p-DOI of lesions that had invaded the palatal bone was significantly larger than that of lesions without invasion (P = .039), with a p-DOI cutoff value of 7 mm. CONCLUSION: Radiological DOI, tumor detectability, and invasion into the palatal bone can be useful in planning surgical treatment strategies for hard palate cancer.

Does the angulation between the maxillary central incisors and the nasopalatine canal differ among sagittal and vertical skeletal patterns? A CBCT study.

OBJECTIVES: To assess the influence of sagittal and vertical skeletal patterns, and sex in the angulation and relationship between the maxillary central incisors and the nasopalatine canal. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) exams of 172 patients were classified into sagittal (class I, II, and III) and vertical skeletal patterns (mesofacial, brachyfacial and dolichofacial). Hard palate-nasopalatine canal and hard palate-long axis of maxillary central incisors angles were measured in sagittal reconstructions. The obtained angles were used to calculate the angulation between maxillary central incisors and nasopalatine canal by triangle geometric relationship. Analysis of variance (multi-way ANOVA) and Tukey post-hoc test were used for data analysis (α=5%). RESULTS: Sagittal and vertical skeletal patterns, and sex presented a low influence on the angulation of maxillary central incisors and nasopalatine canal. Dolichofacial class II women showed the greatest hard palate-nasopalatine canal angulations (P<0.05) and maxillary central incisors and nasopalatine canal angulations (P<0.05). Mesofacial class II and III men presented the lowest maxillary central incisors and nasopalatine canal angulations (P<0.05). CONCLUSIONS: The sagittal and vertical skeletal patterns, and sex have a low influence on the angulation of the maxillary central incisors and the nasopalatine canal.

Computer-designed surgical templates improve the extraction of impacted supernumerary teeth in the hard palate.

OBJECTIVES: The surgical procedure of bony impacted supernumerary teeth (SNT) in hard palate is commonly done with poor visualization and uncomfortable posture. This study aims to introduce our primary practice of presurgical evaluation and guiding exodontia of bony impacted supernumerary teeth (SNT) in the hard palate to reduce surgical trauma, duration and uncertainty. STUDY DESIGN: Twelve patients with impacted supernumerary teeth in hard palate were included. Intraoral scan and the three-dimensional (3D) reconstruction of the cone beam computed tomography (CBCT) file was superimposed, and virtual simulation of flap elevation and osteotomy was conducted on the rebuilt 3D model. A couple of surgical templates were designed with surgical planning software Mimics, fabricated by a 3D printer and were used to guide the extraction of the impacted SNT. RESULTS: The surgical templates fitted well to the teeth and operation site. All the impacted SNTs were accurately located and extracted without damaging the adjacent vital anatomical structures. All patients had an uneventful postoperative recovery without infection or sensory disturbance. CONCLUSIONS: The application of 3D printed surgical templates reduced trauma and increased the accuracy and predictability of surgical extraction of bony impacted SNT in hard palate. The results of this study increased the accuracy and predictability of surgical extraction of bony impacted SNT in hard palate, and reduced the surgeon's embarrassment and surgical trauma because of location difficulty.

A Pitfall in Prenatal Ultrasonic Detection of Submucous Cleft Palate.

OBJECTIVE: We present a case with prenatal diagnosis of submucous cleft palate (SMCP) which was described using 2- and 3-dimensional (3D) ultrasonography in utero. CASE REPORT: A 25-year-old pregnant woman was referred to our department for fetal ultrasound screening. After the detection of cardiac and spinal malformations of fetal, further detailed examination detected SMCP, which showed a gap within the hard palate on axial transversal view with the soft palate visible on sagittal view. The imaging of a defective hard palate in prenatal 3D ultrasonography is similar to that in postmortem 3D computed tomography reconstruction. CONCLUSION: A gap within the hard palate and verification of the visibility of the soft palate should be key points in the prenatal diagnosis of SMCP. Three-dimensional ultrasonic imaging is helpful for displaying the shape and extent of the bony defect in SMCP.

Agreement among instruments of quantitative evaluation of the hard palate in children.

PURPOSE: To evaluate the agreement among instruments of the quantitative evaluation of hard palate. METHODS: This cross-sectional study was performed with a sample of 30 children aged 6 to 11 from Santa Maria, Southern Brazil. The instruments for palate measurements evaluated were: digital caliper, used directly in the oral cavity and in plaster casts, Korkhaus tridimensional bow, used directly in the oral cavity and in plaster casts, and Dolphin Imaging Software used for measurements in cone-beam computed tomography (CBCT). The agreement among different instruments was evaluated using the Intraclass Correlation Coefficient (ICC). RESULTS: The means of all transversal dimensions obtained by cone-beam computed tomography were lower than those of the other instruments - the agreement values in the width between the canines and in the width between the first molars were lower when comparing the cone-beam computed tomography and the other instruments. In the width between the first and second premolars, all comparisons showed acceptable agreement values. Good concordance values were obtained when comparing the palate depth at the second premolar region when using a bow divider inside the oral cavity and in the cast. CONCLUSION: Most instruments presented satisfactory agreement in the measurements related to the transverse plane of the hard palate. However, when the vertical plane was evaluated, only the bow divider applied to both cast and oral cavity presented ideal agreement.

Congenital epignathus associated with a cleft palate: a case report.

BACKGROUND: Epignathus is a rare, benign, congenital teratoma of the hard palate with an estimated incidence of 1 in 200,000 live births. Epignathus frequently leads to a high mortality (80-100%) due to airway obstruction in the neonatal period. CASE PRESENTATION: We report a case of successful management of a rare oropharyngeal teratoma in a African newborn girl who was referred to our institute with a large protruding intraoral mass, combined with cleft palate, causing some respiratory compromise. The palatal mass was removed on the fifth day after birth, and a palatoplasty performed on day 30. CONCLUSION: Epignathus is a life-threatening condition at the time of delivery. Appropriate management begins with securing the airway, followed by complete resection of the tumor.

Do the dimensions of the hard palate have a relationship with the volumes of the upper airways and maxillary sinuses? A CBCT study.

BACKGROUND: As the hard palate is a central structure of the skull, and its close relationship with the nasal cavity, oral cavity, and maxillary sinuses, it would be of interest to study if there is a relationship between this bone and other structures of the stomatognathic system. Thus, this study aimed to assess the dimensions of the hard palate and associate them with sex, and skeletal and breathing patterns. Also, to investigate if there is a relationship between these dimensions and the volumes of the upper airways and maxillary sinuses. METHODS: Two hundred and ninety-eight CBCT scans of patients were classified according to sex, and skeletal and breathing patterns. Then, the linear dimensions of width and height of the hard palate at the regions of the first premolars and first molars, and the volumes of the upper airways and maxillary sinuses were measured using the CS 3D Imaging and ITK-SNAP software, respectively. Data were submitted to multi-way analysis of variance and linear regression, with a significance level of 5% (α = 0.05). RESULTS: Sex and facial type influenced the hard palate dimensions (p < 0.05). Males had greater width and height of the hard palate than females (p < 0.0001). It was observed greater width for brachycephalics at the first premolars region (p = 0.0032), and greater height for dolichocephalics at the first premolars (p = 0.0154) and first molars (p = 0.0038) regions. Skeletal malocclusion and breathing pattern did not influence the measurements of the hard palate (p > 0.05). There was a significant relationship between the width and height of the hard palate at the premolar's region and the total volume of the upper airways (p = 0.018, and p = 0.038), and between both dimensions of the hard palate at the molar's region and the total volume of the maxillary sinuses (p < 0.0001). CONCLUSIONS: The hard palate dimensions are influenced by sex and facial type, but not by skeletal malocclusion or breathing pattern. Also, there is an association between these dimensions and the volumes of the upper airways and maxillary sinuses.

Determination of sex dimorphisms of the thickness of the hard palate in adolescence using computed tomography: Pilot study.

BACKGROUND: In addition to traditional craniometric techniques, computer craniometry has been used in recent decades, including stereometric methods, which make it possible to determine the microanatomical spatial relationships and dimensional features of various structures of the skull, in particular the thickness of the inert palate of the maxilla. AIM: Determination of the gender-specific variability of the thickness of the bony palate at the age of 18-20 years using CT. MATERIAL AND METHODS: The material of the pilot study were 40 computed tomograms of young males and females aged 18-20 years. The method of computer craniometry was used to measure the thickness of the bony palate in sagittal projection taking into account the gender. A graphic raster map was created to identify the palatal areas, then analyze their thickness and determine the safe zones for the mini dental implants. RESULTS: In young males and females (18-20 years) the thickness of the bony palate decreases at different levels from front to back and from the median suture to the alveolar process. The greatest thickness of the bony palate corresponds to its anterior third and reliably predominates in young males at all levels compared to young females. In the middle and posterior third palate, the averages do not show gender differences and their variation is insignificant. CONCLUSIONS: The greatest thickness of the bony palate can be used as the most favorable zone for the fixation of orthodontic mini dental implants. The variability in the thickness of the bony palate should be considered when selecting the most optimal zones and depth of mini-implant placement.

Maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns.

INTRODUCTION: The objective of this research was to compare maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns. METHODS: A total of 241 adults (93 men and 148 women aged from 18 to 25 years) were divided into male and female groups. Subjects were then separately divided into 3 sagittal skeletal groups and 3 vertical skeletal groups. A lateral cephalogram and a cone-beam computed tomography were taken for each subject. We measured the parameters to make statistical analyses and compared them between the different groups. RESULTS: Women had smaller craniomaxillofacial bone width and palatal thickness than men. In sagittal groups, maxillary width, maxillary alveolar width, and external temporomandibular joint fossa width in Class II and Class III malocclusion groups were smaller than in the Class I group for both women and men. The internal temporomandibular joint fossa width was the same results in men and women. In vertical groups, palate thickness, maxillary width, and maxillary alveolar width of the high-angle group were smaller than those of the low-angle group, regardless of sex. CONCLUSIONS: To an extent, maxillary width is correlated with vertical and sagittal skeletal patterns, and insufficient maxillary width would lead to unfavorable skeletal patterns. Differences exist in the morphology of craniomaxillofacial bone between men and women. Therefore, these findings can provide clinicians with references for differential diagnosis and treatment plans.